The air gap is usually a fitting mounted to the sink or kitchen cabinet. If the air gap is clogged or the drain hose is not in a high loop position, then water backing up and not draining may be causing the drainage issue. Both the air gap and high loop are designed to stop wastewater from flowing back into the dishwasher during the draining cycle. If you do not have an air gap, the drain hose may be positioned in a high loop underneath the sink. If your dishwasher drain hose does not connect to a garbage disposal, it may connect to an air gap. If the dishwasher has been recently installed, make sure the garbage disposal knockout plug in the garbage disposal’s drain tube has been removed. Detaching the drain hose and clearing the disposal’s drain tube may fix the drainage issue. Note that the garbage disposal’s drain tube that connects to the dishwasher drain hose can become clogged. If the dishwasher is connected to a garbage disposal, make sure the disposal is clear of debris. Drain Pipe and Garbage Disposalīefore checking the dishwasher components that could be responsible for the drainage problem, check that the pipe the dishwasher drains into is not clogged. This guide applies to most GE dishwasher models, including the following: Go through the checks below to diagnose and fix the drainage issue in your GE dishwasher. If the dishwasher still will not drain, there may be a defective solenoid causing the issue. The filter and sump should also be checked for debris. However, before you access the drain pump, check that the drain hose is connected properly and not blocked. Most of the time, the dishwasher will not be draining because of a defective drain pump. Fortunately, this guide is here to help you. Not only is there a risk of further damage caused by leaking water, but dirty dishes will also start piling up in the sink. A dishwasher that cannot drain is a problem you will want to get fixed quickly.
0 Comments
Leave a Reply. |